What kind of knife engraving machine for advertising pvc?

Advertising pvc is processed with flat-bottomed sharp knife, straight knife and milling cutter
What kind of function does the advertising pvc use for carving?

1. Flat-bottomed sharp knife is mainly used to engrave pvc board.

2, the straight knife is mainly used to engrave pvc board.

3, milling cutter is mainly used to engrave and cut pvc board.

What is the influence factor of the knife carving used in advertising pvc?

There are many factors influencing the use of knife carving in advertising pvc, including the processing materials, the thickness of the material, the size of the words to be made, the tool loading and other factors.
Advertising pvc with what knife engraving machine introduced clearly, how to advertise pvc without burrs?

1. Mirror the document to be engraved. Generally, the burrs appear on the top of the engraving, and then come down on the bottom;

2, the engraving path should be counterclockwise;

3, with a hollow knife (single-blade spiral knife), the best imported;

Here are some cases according to the thickness of the board:

How to engrave 2-3mm PVC board with burrs, use a double-edged spiral knives with fine points, 1mm, 1.5mm, all the knives should be slower to go;

The 5mm PVC board should also be moved slowly. The small word uses the above-mentioned cutter, and the large character uses a hollow knife;

8mm, 12mm, 15mm PVC panels are engraved with hollow knives, note that the blade length is greater than the thickness of the sheet;

The 20mm plate does not have an imported knife with a length of 22mm. It can only be cut with a common hollow knife or a double-edged knife;

Try a small word before cutting in large quantities, otherwise the whole board will be wasted.

Advertising pvc carving knife loading and unloading precautions?

1. When cleaning, use a gasoline or WD40 cleaning agent CAD drawing to clean the chuck and pressure cap.

2. Put the chuck into the pressure cap, otherwise the cutter is not easy to install. If the chuck is not clamped in the pressure cap, the chuck will be caught in the motor shaft when the knife is unloaded.

3. Before clamping, pay attention to whether the chuck matches the selected tool, otherwise the tool cannot be tightened.

4. When clamping the tool, the part of the tool that protrudes out of the chuck should not be too long. Otherwise, the embossing drawing is easy to generate vibration during the machining process, which affects the processing quality of the workpiece surface.

5. When changing the tool, it must ensure that the spindle speed is zero, that is, the tool can be dismantled when the spindle is stopped, otherwise serious personal injury accidents may occur.

6. If you use the presser foot to engrave, you must use a vacuum cleaner to clean the dust on the presser foot and the spindle, and then clamp the tool.

7. In the process of screwing up the cap upwards, be sure to press the cap on the positive rotor thread, first screw it in place with no effort.

8. When unloading the knife, use an air gun to clean the dust on the pressure cap and the rotor shaft before unloading the knife.