Some steps of the metal engraving machine

1. The metal engraving machine is set to change the tool. After setting the tool change position, after using the special case to change the tool position, the machine head will be at the set position and wait for the operation to perform the tool change operation.
2. The metal engraving machine sets the tool position. This group of parameters is used to set the X, y coordinates and the Z-axis rapid drop interval (Z-axis value) at the center of the tool set when the tool is used.
       3. Engraving sets the travel distance. According to the process range of different types of metal engraving machines, the manual stationary machine tool is used to park the machine to the limit position of the three axes until it hits the stroke switch, respectively, and records that the X, y, and Z axes can be at a minimum. The maximum coordinate value, the corresponding position in the output position parameter can be.
4. The specific setting method of the metal engraving machine system software is: manually grasp the position of the machine tool to the inconvenient tool change operation, record the current machine tool coordinate value, and input it into the corresponding status parameter.
       5, engraving path switch settings. The path switch is used to grasp whether the parameters of the running path can be processed during machining. These parameters include the feedrate spindle speed, the slow-speed drop-off interval, the speed of the knife lift, and the fall delay time.
6. The engraving process allows the operator to know the time spent on engraving after engraving. Its calculation is based on the set engraving parameters, the time taken to engrave the workpiece after machining. This time does not include the time of tool change and positioning of the two ends. It is a budget value. The machining time affects the feed rate, the falling speed, the falling delay, the Z-axis stroke, and so on.