How to solve the noise of the engraving machine

    The buyer told us that the engraving machine was suddenly very noisy when working. The previous work was always normal. After our investigation and investigation, we finally found out where the noise source is spoken by customers. Today we will analyze the main sources of noise in the engraving machine and guide you to solve these problems correctly. At a certain frequency, the Shenzhen engraving machine will also generate body resonance and emit obvious noise. This type of noise does not affect the normal use of the machine.



The noise that affects and damages the engraving machine is mainly reflected in the following two aspects:



1. Abnormal noise is emitted during axial walking. This type of phenomenon is mostly present in the X, Y axis.
The tombstone engraving machine is mostly damaged by the axial motor shaft bearing or the X-axis guide rail lacks lubricating oil, dirty, too tight, ball wear, ball drop, etc., must be dealt with in time.

2. Abnormal noise is emitted when the spindle motor is running.
The generation of such noise proves that there is a quality problem in the spindle bearing or the service life of the spindle bearing has arrived, or the quality is degraded or damaged after wear, and replacement can be considered at this time.