How to install the luminous characters?

First of all, we must conclude that the luminous word device is above the raw material. According to my years of experience, the general device is on the painted glass or gusset plate or wood material.

When the device emits a word, first determine the position of the luminous word device, and then the bottom plate of the device is illuminated, and the lamp tube of the luminous word is attached to the bottom plate. When the device is used, it is preferable for one person to hold the bottom plate by hand, and one person uses a hand drill The screws are fixed in, and the screws should be nailed a few times, otherwise it will be unreliable.

After the bottom plate device is installed, the light-emitting word panel is installed again. The light-emitting word bottom plate and the panel should be aligned with the rear device. When the device is installed, pay attention to the light-emitting word light, and the cable should be placed in the light-emitting word. One person fixes the screw with a hand drill, and nails a few screws. When the screw is nailed, it has a point of view with the illuminated word panel, close to the Chevron board of the bottom plate.

After the device is completed, it is wired. First connect the transformer and the luminous word. Connect a single luminous word with a main wire. Pay attention to the wiring, connect the same color, and connect in series.

When connecting the transformer, you must first connect the general power, which is connected to the two terminals of the transformer, usually the first and the second, and the wire connecting the luminous word, which is generally the first and the center of the transformer. If the connected light is not lit, the two lines of the AC light word will do.