CNC carpenter carving machine should prepare some matters before operation. When operating CNC carpenter carving machine, it is necessary to pay attention to the operation requirements and strictly abide by the operation requirements of carpenter carving machine.
Safety operation requirements in the operation of carpenter carving machine
1. After starting the machine, the carpenter carving machine can feed after reaching the maximum speed. The feed rate should be based on the wood material; it can be manipulated with or without thrift, cracks and processing thickness.
2, the board must be fixed and firm, otherwise under the high-speed carving, if the board moves, it is a simple error, smashed the board and so on.
3. The guide plate must not be adjusted during operation.
4. The wood chips generated by the carpenter's carving machine should be removed with a brush, and should not be removed by hand to avoid hurting the hand.
Things that seem to be simple should be strictly observed. Otherwise, the production power of the CNC carpenter carving machine will not be reduced. The CNC carpenter carving machine will not be used according to the requirements, which will jeopardize the service life of the CNC carpenter carving machine. Therefore, the vast use of carpenter carving machine users, we must strictly abide by the requirements of CNC carpenter carving machine.
